The Vortrak 'N' four track controller has state of the art design, electronics and construction, producing the very best in performance and capability. Complete with two hand held controllers.
Ideal for multi-use i.e. four main lines, two main lines + two sidings, or three main lines with one siding etc. allows you to shunt whilst the main lines accommodate the expresses etc.
The 220/240 Volt AC mains-powered controller is designed with FOUR TRANSFORMERS, one for each track, to supply correct voltage to the track. Automatic re-set 1.1amp circuit breakers are fitted to each track to protect against overload. Total amps 4 x 1.1 amps (1.1 amps per track) = 4.4 amps
LSP fitted 'locomotive stall protection'.
Unique to Morley, the Vortrak 'N' controller is designed with an on-board Heavy Duty Capacitor Discharge Unit (HD/CDU). When used with the correct switch it will activate the points motor, giving it a firm, positive, short burst of current, being of short duration it prevents the points motor from being burnt out. A "Points CDU ready" LED indicator is situated on the front panel. A points motor diagram is supplied.
The screen printed silver anodised aluminium front panel gives perfect indication of the settings of switches and controls, supported by LED indicators, a dual LED for power and direction, plus CDU LED
Centre off power controls provide locomotive direction change, together with perfect smooth control at slow speeds, as well as fast.
Two 12 Volt DC uncontrolled accessory outputs are provided, with protection from 1 amp circuit breakers. 2 x 1 amp (per output)
Two hand-held units each with a 5 metre lead are included, with centre off controls providing power control and direction change.
Output connections are by Screw Type PCB terminal blocks.
Desk type dark grey case with sloping aluminum front.
A 1.0 metre UK mains power lead is fitted as standard.
Fully tested and guaranteed for 5 years.
We manufacture in the UK. RoHS compliant. Based on the information provided by our by our component manufacturers, the Vortrak does NOT contain the substances restricted by the RoHS legislation at levels over the maximum concentration values.
- Four track controller manufactured from quality components tested to 105 degrees centigrade.
- Suitable for 'N' gauge layouts.
- Input:220/240 AC mains.
- Output: 4 x 12 volts DC at 1.1 amps protected all controlled.
- 2 x 12 volts DC accessory outputs protected by 1 amp circuit breakers, both uncontrolled.
- Locomotive direction change by centre off power control.
- On-board Capacitor Discharge Unit (CDU) for points motor operation. Wiring diagram supplied.
- Can be supplied with European 2-pin or Shuko mains plug top.
- Dimensions:311mm x 170mm x 89mm back/ 45mm front (slope)
- Cab control - OK
- Common Return - OK