Morley Vesta Z Gauge Controller (EUROPE) (Bespoke Item)

EURO Vesta Z
£108.62
Stock 100

Morley Vesta Z controller for European and Eire customers,the price of £109.62 includes full postage / shipping.(A Bespoke Item)

EACH CONTROL KNOB HAS A ZERO CLICK INDICATOR AT 12 'O' Clock.
2 x  2.5mtr  remote handsets included. 

The controller will be supplied with a UK type 13 amp plug for Eire. A Schuko 2 pin for Europe ,other types of mains plugs can be fitted on request.

 

This controller is not a toy and should be used by persons over 14 years of age.

 

Total Price:£109.62



addthis

VESTA FOR Z GAUGE LAYOUTS

 

Based on our extremely successful VESTA for N  controller the VESTA Z controller has state-of-the-artdesign, electronics and construction, offering the very best in performance and capability.

Each 220/240 volts AC mains-powered VESTA Z controller is designed with twin transformers to supply correct voltage to each track. Automatic re-set circuit breakers protect against overload. Mains lead of 1.5 mtrs long, with either Euro/Schuko mains plug fitted, or a UK type plug for UK/Eire. Other plug types can be requested.

Unique to Morley, the VESTA Z controller is designed with an on-board Capacitor Discharge Unit (CDU) when used with a correct momentary switch it will activate the points motor, giving it a firm, positive, short burst of current being of short duration it prevents motor burn out. A "points CDU ready" yellow LED indicator is situated on the front panel.

The screen printed front panel gives perfect indication of the settings of the switches and controls, supported by LED indicators, a dual LED for power and direction, plus the CDU LED.

Centre off power controls provide locomotive direction change together with perfect smooth control at slow speeds as well as fast.

A 12 volt uncontrolled accessory output is provided with protection from a 1 amp circuit breaker.

Two hand held units are included with centre off controls providing power and direction change. The cable length on each unit is 2.5 mtrs.

Extension cables for Hand-Held controllers available.

Output connections are by a Screw Type PCB Terminal Block.

Desk type dark grey case with sloping aluminium front panel.

Fully tested and guaranteed for 5 years both parts and labour.

We manufacture in the UK.

Technical specification.

  • Twin track controller manufactured from quality components tested to 105 degrees centigrade.
  • Two transformers one per track manufactured to our specification by a leading transformer manufacturer.
  • Input: 220/240 Volts AC mains.
  • Output: Z Gauge power. controlled.
  • Accessory output 12v 1amp uncontrolled.
  • Locomotive direction change by centre off power control.
  • On-board CDU for points operation.
  • Mains lead of 1.5 mtrs long, with either Euro/Schuko mains plug fitted, or a UK type plug for UK/Eire. Other plug types can be requested.
  • Dimensions: 215mm wide x 130mm Height x 75mmdepth rear, 47mm front.
  • Cab control - OK
  • Common return - OK
     
No recommended products at the moment.
No recommended products at the moment.